I remember posting on my Instagram account a picture of a little rolly cart we have in the house.Nothing special about this freebie cart. What’s special is the amount of natural light shining on it.Obviously, this was after we had gotten some of the doors and windows cut in.But let me back up a bit.Normal houses are built with the window and door openings already there, so you just gotta put in the actual windows into the openings, and you’re done.
Source: Google imagesBut, as we all know, our house is not a normal house.We basically have a house inside of a house. The shell is the metal building, and there is a 2×4 stick-built house inside.
Exterior – pre windows and doors
Same wall as the previous pic – Interior – before door and window openings are cutWe chose to not have the metal building designed with all the window and door openings because we knew we’d be building these interior walls during the winter time. Because of how we needed to attach the interior walls to the exterior walls at the openings, we could not put the windows in until the interior walls were built.Which means, if we had already had the openings in the metal building, we would not have been able to heat the house and keep working in it over the winter (which was when we were building those walls). We would have lost all that working time.And would have been even further behind than we are now.But we finally got all the interior framing done, so it was time to tackle the windows and doors!We are planning on making a blog post and even a video about the actual technical method to put in the windows and doors, but for now, here’s the less detailed and less tedious (I hope) version.The first window we put in was next to the front door.
Since it was right next to a door with a lot of glass in it, I felt like this one window didn’t make a major difference in the look of the living room or the light that was coming in. I mean, it was cool to be able to see a slightly different view, but it wasn’t a huge change.The next opening we did was the sliding glass door in one of the downstairs rooms.This one took a full week of us working on it several hours a day to figure out how to do it.
While we were figuring it all out and working on it bit by bit, the weather decided to not play nice.
But eventually we were able to get the door installed.
And let me tell you, this door made a difference!The main door we used up to this point was the laundry room door (to the left of the slider in the above pic.)Since the interior walls are all still just open studs, the light from this door not only lights up that room, but spills out into the other adjoining rooms.
It was definitely something to open that laundry room door and walk in like we’d done hundreds of times before, and be greeted with light!Next was Pajii’s bedroom sliding glass door. It did not take us nearly as long this time to get it in as the first one. And I don’t get hardly any pictures. But I think he likes it!
After that was one of the doors I was most excited for, the dining room slider.This is the door opposite the front door, and was sure to let in lots of natural light to an end of the house that was perpetually dark.
Just a peak!My nephew came over a couple evenings and weekend or two and helped put in doors and windows.
We worked until after dark on one of the longest days of the (less than 10 days before the solstice) to get that door in!
Had to finish by flashlight, but finish we did!After that things went a lot smoother and faster. We knew what we were doing by that point.

Cutting the 1⅛” plywood that we used for the frames.

Anchoring one of the metal side supports to the concrete floor.




Another late night finishing up the job


Flower Girl and her cousins wanted to watch the “fireworks”

We can actually see all the way down into the valley from our bedroom window!

Putting my climbing skills and gear to good use


We watched some friends’ kids one day and I put their 11 year old son to work. 😁

The side in the shade is still missing four – yes 4 – windows in this pic!








Window in Pajii’s room still uncut (on the right). That is a south facing window, so it now let’s in a ton of light.


One of the upper great room windows waiting to be cut

You can see Hubs on the scaffold just starting to work on one of the upper great room windows.

Window in the girls’ room still not cut either





Love this! I can’t wait to start putting in windows and doors in our house!
LikeLiked by 1 person
Pingback: House Update: electrical and plumbing | Castle Rock Homestead